Skip to content

Ethylene oxide sterilization

Automation, process and compliance for EO sterilization units, from study to commissioning. EAi’s core reference since 1995.

The challenge

An ethylene oxide sterilization unit runs a sequence of stages that must each stay within their validated parameters: preconditioning, sterilization, aeration. Dozens of batches can be in progress at the same time, and pallets move from one stage to the next.

Releasing a batch depends on proof that every parameter was met. The control system must therefore be reliable, traceable, qualified to ISO 11135 and EN 1422, and compliant with FDA requirements (21 CFR Part 11).

The EAi solution

EAi has worked in ethylene oxide sterilization since 1995. Solid experience in process and instrumentation makes it possible to support clients across the entire EO chain, from end to end.

The cycle and its stages

EAi masters batch management, up to around a hundred batches simultaneously, across every stage of the cycle:

  1. Precondi­tioning

    Load temperature and humidity

  2. Sterilization

    EO injection, exposure, evacuation

  3. Dynamic aeration

    Forced air renewal

  4. Static aeration

    Desorption before release

The four stages of the cycle, linked by pallet conveying. Each batch is tracked from one stage to the next.

Pallet conveying

EAi also has expertise in conveying pallets between the different process stages: each pallet carries its batch data from one chamber to the next.

Pallet conveying between stages: each pallet carries its batch data.

Areas of work

AreaServices
Process and electrical diagramsP&ID engineering: design, creation, updates. Electrical schematic engineering: design, creation, updates.
Automation and supervisionComplete system: architecture design, configuration, development, commissioning. Instrumentation, PLC, supervision and batch report management.
Automatic parameter controlStudy, development and implementation of automatic parameter control systems, saving time and improving efficiency in batch release.
Qualifications and complianceIQ, OQ, software validation, ISO 11135, EN 1422, compliance with FDA requirements (21 CFR Part 11).
Software qualityQuality follow-up of software maintenance interventions, implementation of versioning, change control management.
MaintenanceSoftware maintenance contracts.
Remote maintenanceSecure remote access, under the end customer’s control, to optimize and reduce intervention times.
NetworkManagement of standard or complex industrial networks, such as MRP rings.

This list is not exhaustive.

Adapting to your practices

Adapting to your procedures and working habits is essential. EAi always acts as a solution provider, while respecting regulatory requirements and the practices you already have in place.

Let’s discuss your project.

Continuous improvement, revamping, qualification or root cause analysis: let us define together the solution suited to your installation.

Thierry Pontlevy, manager of EAi SARL, in front of a process supervision screen

Thierry Pontlevy

Manager, independent consultant in automation and EO sterilization